1、锅炉房内的设备布置应便于操作、通行和检修。
Boiler room equipment should be arranged for easy operation, access and maintenance.
2、锅炉房应有足够的照明和良好的通风以及必要的降温和防冻措施。
Boiler room should have adequate lighting and ventilation as well as the necessary
cooling and freezing measures.
3、锅炉房应防止积水。
Boiler room should prevent accumulation of water.
4、锅炉房地面应平整无台阶。
Boiler room floor should be smooth and without steps.
5、锅炉房承重梁柱等构件与锅炉应有一定距离或采取其他措施，以防受高温损坏。
Load-bearing beams and other components of the boiler room and the boiler should be a
certain distance or take other measures to prevent damage by high temperatures.
6、锅炉房每层至少有两个出口，分别设在两侧。锅炉前端的总宽度不超过12m，且面积不超过200
平方米的单层锅炉，可以只开一个出口。
Boiler room each have at least two exits are located on both sides. The total width of the front of the boiler does not exceed 12m, and the area does not exceed 200 square meters of single-7, layer boilers, can only open an exit.
7、锅炉房通向室外的门应向外开，在锅炉运行期间不准锁住或闩住。锅炉房内工作室或生活室的
门应向锅炉房内开。锅炉房的出入口和通道应畅通无阻。在锅炉房内的操作地点及水位表、压力
表、温度计、流量计等处，应有足够的照明。锅炉房应有备用的照明设备或工具。
Leading to the boiler room doors should open outwards outdoors during boiler operation allowed locked or bolted. Boiler room studio or living room boiler room door should open. Boiler room entrances and channels should open. In the boiler room operation location and water table, pressure gauges, mometers, flow meters, etc. should have adequate lighting. Boiler room should spare lighting equipment or tools.
