1、电蒸汽锅炉http://www.jnshengxin.cn/供汽前，应进行暖管。暖管的目的主要是使管道、阀门、各附件的温度缓慢上升，不可骤热，避免由于管道或阀门因温差过大，产生应力而造成损坏。
Electric steam boilers for steam before, should be warm tube. The main purpose is to warm the pipe so that the pipe, valves, slowly rising temperature of each attachment, not sudden heat, avoid the pipe or valve is too large due to temperature, stress and damage.
2、电蒸汽锅炉暖管时，应打开分汽缸疏水器的旁通阀，逐渐开启蒸汽主阀，使蒸汽预热母管后再进入分汽缸，进行暖缸。
Electric steam boiler heating pipe, open the sub-cylinder trap bypass valve, gradually open the main valve steam, the steam preheat mother tube and then into sub-cylinder, the cylinder warm up.
3、电蒸汽锅炉当母管和分汽缸内凝结水排除后，关闭疏水器旁通阀，观察锅炉压力表与分汽缸上压力表指示压力是否相等，然后全部打开主汽阀及分汽缸的分支送汽阀向系统供汽。
Electric steam boiler when the inner tube and the sub-cylinder mother condensate is removed, turn off the hydrophobic bypass valves, pressure gauges and pressure gauge on the boiler were observed indicating cylinder pressure points are equal, then the main steam valve fully open branches and sub-cylinder steam delivery steam supply valve to the system.
4、电蒸汽锅炉http://www.jnshengxin.cn/送汽过程中应观察水位计水位，注意补水并维持炉内汽压。
Electric steam boiler steam process should be sent to observe the water level gauge, pay attention to the maintenance of the furnace and steam pressure.
